[es] - TP-Link TL-MR3220 Ver 1.2 problem

cvvedran
nezaposlen hobi elektronicar
Loznica

Član broj: 216341
Poruke: 5
*.dynamic.sbb.rs.

Profil

^{21.04.2015. u 10:29 - pre 121 meseci}

Pozdrav svima,

koristio sam ruter TP-Link TL-MR3220 nekoliko godina , u njega je ubacen Open WRT softver i Telenor 3g ruter. Sve je radilo izvanredno,do pre mozda mesec dana kada je izgubio podesavanja za 3g konekciju. To se ponavljalo stalno. Tada sam pokusao da ubacim noviji softver,opet WRT,jer sam bio prezadovoljan predhodnim,medjutim posle ucitavanja novog softvera,ne mogu da pristupim ruteru preko browsera,tako da ne mogu nikako da ga podesim. Chrome recimo pokaze gresku "ERR_CONNECTION_REFUSED". Medjutim,kada ga ping-ujem,ruter se javlja. Takodje se javlja na Telnet i izbaci sliku,koju sam prikacio. Posto verujem da ovde ima ljudi koji se dobro snalaze u ovome,da li preko Telneta recimo ili na neki drugi nacin mogu sada ovaj ruter vratiti makar na fabricki softver.

Prikačeni fajlovi

to link telnet.jpg - 46.02k

Odgovor na temu

cvvedran
nezaposlen hobi elektronicar
Loznica

Član broj: 216341
Poruke: 5
*.dynamic.isp.telekom.rs.

Profil

Re: TP-Link TL-MR3220 Ver 1.2 problem

^{23.04.2015. u 08:57 - pre 121 meseci}

Evo resenja ako se nekom desi isti problem...
Prvo treba ukucati "passwd" a zatim uneti neku sifru,kako bi se startovao "sshd"
a zatim sam pratio ovo upustvo i sve je proslo glatko:

TP Link TL-WR1034ND OpenWRT/MLPPP, OpenWRT and DD-WRT
TEW-632BRP v1.1 OpenWRT and DD-WRT
1. download latest firmware for your routers (makes it easy to rename it to something simple like tplink.bin)
2. download winscp (google it its FREE)
3. reset your router to default settings with a hard reset
4. login to your router 192.168.1.1 with the SCP protocol
5. upload your firmware to the /tmp directory (do not change directory!)
6. push ctrl+t or click on commands menu than on open terminal
7. type this command in:
mtd -r write firmware.bin firmware (change firmware.bin to your bin)
*** This will install the firmware and will reboot your router and than you will get a message in winscp that you are not connected to the router this is normal and good. Once the router has been rebooted close winscp and continue
8. go back to your browser and login to your router with the stock firmware
9. IMPORTANT now use the stock firmware webgui upgrade option to rewrite the stock firmware or you can have the option to switch to another 3rd party firmware, but you MUST write the firmware again with the webgui
10. All DONE!!

Pozdrav svima

Odgovor na temu