ne treba mi windoza, digo sam lindzu da iskopiram sve posto vindoza umre sa ovim diskom plus mi ne da full pristup disku posto su na njemu ko sto rekoh progdata i user dirovi ..
sta je crklo ne znam, ko sto rekoh nemam sa ovim 3+ mnogo iskustva .. na onim <1T imam iskustva sa svim mogucim kvarovima .. ali sa ovim velikim truba, iskustvo nula ...
smart, smart je jedna velika prevara prijatelju, imam mnogo losa iskustva sa njim, tipa proveravam smart datu na disku na serveru, sve do jaja sve idealno nema nikakvih gresaka i onda - dange ladno posle 30min umre disk, umre SKROZ mrtav ... tako da smartu verujem za temperaturu, broj radnih sati, broj paljenja i to mu dodje to ... verujem i za long read test ali to samo da mi prepozna mrtve sektore na vreme ne da detektuje da ce disk da mre...
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended captive
Completed: read failure 90% 10335 2929896128
SMART overall-health self-assessment test result: PASSED
1 Raw_Read_Error_Rate 0x000f 114 096 006 Pre-fail Always - 73876024
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 81745304982
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
187 Reported_Uncorrect 0x0032 075 075 000 Old_age Always - 25
188 Command_Timeout 0x0032 099 048 000 Old_age Always - 133 244 816
198 Offline_Uncorrectable 0x0010 040 040 000 Old_age Offline - 9904
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 616
i pazi sta kaze PASSED :D :D :D ... mislim .. ko voli evo mu ceo .. bezte od barakuda u majcinu ni 10k sati nije uspeo da izgura a nikako nije bio jeftin .. ne znam sta je crklo moguce da je hw problem .. da nema veze sa elektronikom .. posto ovaj seek rate nema smisla .. read error ima smisla ako ima bed sektora ali seek error je pozicioniranje :(
Code:
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.0.4-301.fc22.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1CH166
Serial Number: W1F2TCHQ
LU WWN Device Id: 5 000c50 06082d4f1
Firmware Version: CC26
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 20 17:14:52 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 328) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 096 006 Pre-fail Always - 73876024
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 100
5 Reallocated_Sector_Ct 0x0033 096 096 010 Pre-fail Always - 4744
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 81745304982
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10417
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 79
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
187 Reported_Uncorrect 0x0032 075 075 000 Old_age Always - 25
188 Command_Timeout 0x0032 099 048 000 Old_age Always - 133 244 816
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 061 051 045 Old_age Always - 39 (Min/Max 32/42)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 23
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1973
194 Temperature_Celsius 0x0022 039 049 000 Old_age Always - 39 (0 20 0 0 0)
197 Current_Pending_Sector 0x0012 040 040 000 Old_age Always - 9904
198 Offline_Uncorrectable 0x0010 040 040 000 Old_age Offline - 9904
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 616
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 10381h+07m+12.533s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 15261619302
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 10083170288
SMART Error Log Version: 1
ATA Error Count: 51 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 51 occurred at disk power-on lifetime: 10335 hours (430 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d4 00 82 4f c2 00 00 01:43:10.353 SMART EXECUTE OFF-LINE IMMEDIATE
b0 d0 01 00 4f c2 00 00 01:43:04.837 SMART READ DATA
ec 00 01 00 00 00 00 00 01:43:04.832 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 01:43:03.077 IDENTIFY DEVICE
b0 d5 01 06 4f c2 00 00 01:37:43.448 SMART READ LOG
Error 50 occurred at disk power-on lifetime: 10180 hours (424 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 ff ff ff 4f 00 07:42:40.194 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 07:42:40.194 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 07:42:40.172 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 07:42:40.154 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 07:42:40.149 READ FPDMA QUEUED
Error 49 occurred at disk power-on lifetime: 10180 hours (424 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 ff ff ff 4f 00 07:42:40.194 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 07:42:40.194 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 07:42:40.172 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 07:42:40.154 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 07:42:40.149 READ FPDMA QUEUED
Error 48 occurred at disk power-on lifetime: 10174 hours (423 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 10 48 ac 62 40 00 01:25:28.641 WRITE FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:25:28.641 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:25:28.641 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 01:25:28.641 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 01:25:28.641 WRITE FPDMA QUEUED
Error 47 occurred at disk power-on lifetime: 10174 hours (423 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 10 48 ac 62 40 00 01:25:28.641 WRITE FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:25:28.641 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:25:28.641 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 01:25:28.641 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 01:25:28.641 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended captive Completed: read failure 90% 10335 2929896128
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.